Pregledano

Cording Foot za bernette Funlock b42/b48

5020405117

Novi proizvod

Cording Foot
za bernette
Funlock b42/b48

With the Cording Foot
with Cording Guide,
you can create piping,
corded tucks and
decorative trims.

Više detalja

kn 350,00 s PDV-om

šifra: 5020405117

Cording Foot
za bernette Funlock b42/b48 

With the Cording Foot with Cording Guide,
you can create piping,
corded tucks and decorative trims.
This presser foot guides decorative and fine cords of up to
2 mm thickness exactly and precisely below the coverstitch
seam as they are being sewn on.
Alternatively, it can also be used to create and insert piping.

To sew cording:
1. Set machine for „Coverstitch narrow”, using needles D&E
2. Raise the presser foot and change to “Cording foot”.
3. Snap the “Cording Guide” into the hole at left front of stitch
plate and in the gap between rolled hem lever and coverstitch-cover.
4. Note: cord diameter of up to 1/16” (2.0 mm) can be used.
5. Insert cord into the hole of the “cording guide”, then through
the groove of the “cording foot”.
6. Pull the cord tail about 2” (50 mm) behind the foot.
7. Slide fabric under foot and above the cord.
8. Lower the presser foot and sew, while guiding the cord behind
the foot when beginning to sew.
To sew Piping:
1. Set machine for „Chain Stitch”, using needle D.
2. Raise the presser foot and change to “Cording foot”.
3. Note: “Cording guide” is not used for this function.
4. Note: cord diameter of up to 1/16” (2.0 mm) can be used.
5. Insert cord through the groove of the “Cording foot”.
6. Wrap fabric around cord in front of foot. Slide fabric under foot.
7. Lower the presser foot and sew over fabric.
8. Note: Hold cord behind the foot when beginning to sew.

This presser foot guides decorative and fine cords of up to 2 mm
thickness exactly and precisely below the coverstitch seam as they
are being sewn on. Alternatively, it can also be used to create and
insert piping.

    14 drugi proizvodi u istoj kategoriji:

    Akcija

    brother NV15 inovativni šivaći stroj
    kn 2.990,00 kn 3.090,00